AOM Driver A35-Series
 

Key Features:

Frequency range 80 to 350 MHz

RF output power 5 Watt

Optimized for grey-scale applications

RF on/off ratio > 65 dB

Constant output power design: maximum fluctuation ± 5% between cold and warm state

Modulation frequency up to 50 MHz

Conductive cooling through base plate

Compact housing, fully shielded (EMC)

 

Applications:

Fast modulation components for extra cavity applications, e. g. RGB systems

 

Technical Specifications

Supply Voltage

24 V DC

Carrier Frequency

nominal value ± 30 ppm

 

available frequency range: 80 … 350 MHz

 

standard frequencies: see section “Variants List”

Max. RF Output Power

5 W @ 50 ohm

 

adjustable from 1 to 5 W by potentiometer

Analogue Modulation

0 .. 100% of max. RF output power

 

input voltage and impedance: see section “Variants List”

Digital Modulation

TTL levels

 

input impedance and logic: see section “Variants List”

Modulation Frequency

< (⅓ carrier frequency) and < 50 MHz

(digital and analogue)

 

RF On/Off Ratio

> 65 dB

RF Rise Time (10 … 90%)

< 15 ns @ 50 ohm

RF Fall Time (90 … 10%)

< 15 ns @ 50 ohm

Housing

Aluminium, fully shielded, conductive surface passivation

 

Variants List / Ordering Codes

1) Further configurations on request.

2) See section “housings”.

3) The base plate dimensions (size, holes) are equal with legacy drivers A33_ and A34_.

4) See section “Operation Scheme of Analogue and Digital Modulation“.

 

Operation Scheme of Analogue and Digital Modulation

Housings

“Standard” Housing, base plate 120 x 70 mm

Connectors

Control Connector
 AOM driver N21xxx-yAM     N21xxx-yDM      N31xxx-yADM      AOMs