Femto-second Lasers 1

STIM-DE Series

Based on patented Fiber Chirped Pulse Amplification (FCPA) technology, the industry-leading FCPA μJewel™ series offers sufficient pulse energy for selected material processing at a near-infrared wavelength of 1045 nm. Harmonic generation packages, which convert its output to visible and UV wavelengths, are available . The FCPA architecture allows users to choose between high energy operation up to 50 μJ pulses at a repetition rate of 100 kHz or 200 kHz, and high average power of 10 W and 20 W at 1 MHz in the fundamental wavelength. The STIM-DE Series allow for material processing at faster rates, depending on the application requirements.

Features：

- Ideal for transparent fs laser material processing, among other applications

- Proven industrial reliability in the field since 2004 market introduction

- Mechanical reliability complies with MIL-STD-810F and IEC 60601 standards

- Factory set up to 5 MHz repetition rate available

- Naturally induced Air-cooled

- Regulatory certifications available

- Complete software/remote diagnostic testing and in-field configuration

Specification:

	STIM-DE1050	STIM-DE2020
Wavelength	1045 ± 5 nm	1045 ± 5 nm
Average Power	≥ 10 W	≥ 20 W
Pulse Duration	≤ 350 fs	≤ 350 fs
Pulse Energy	≥ 50 μJ	≥ 20 μJ
M²	≤ 1.3	≤ 1.3
Repetition Rate	200 kHz 1 MHz
Beam Quality	M² ≤ 1.3
Polarization	Horizontal with respect to baseplate
Power Stability	≤ 1% rms after stabilization over ± 1 ˚C
Output Aperture	Height 55.4 mm
Laser Head Dimensions	666 x 520 x 165 mm³
Laser Head Weight	≤ 45 kg
Head Heat Dissipation	Max. 100 W
Controller Dimensions	433 x 483 x 222 mm³
Controller Weight	≤ 30 kg
Power Consumption	Max. 1200 W
Operating Voltage	100-120 or 200-240 VAC
Output Trigger	TTL 100 ns pulse
Operating Temperature	20-30 ºC
Storage Temperature	0-50 ºC
Warm up time	≤ 60 minutes
Cable Length	3 m

Configuration:

- Pulse Select: Allows users to select up to 15 pre-set repetition rate values; typical pre-select repetition rates range from 100 kHz to 5 MHz

- Pulse Pick: Enables operation from an on-demand single pulse to high repetition rates up to 100 kHz

- Pulse Flex: A combination of Pulse Select and Pulse Pick; offers the possibility to operate the laser from an on-demand single pulse all the way up to 5 MHz

- Harmonic Module: Attachable to the laser head to convert its output to visible and/or UV wavelengths

- Burst mode: Provides bursts of pulses within pre-determined boundary conditions

STIM-DX Series

The most compact laser form based on patented Fiber Chirped Pulse Amplication (FCPA) technology. The DX Series lasers offer sufficient pulse energy for selected material processing at a near-infrared wavelength of 1045 nm with an ideal compact form factor. Harmonic generation packages, which convert its output to visible and UV wavelengths, are available. The FCPA architecture allows users to choose between high energy operation up to 40 μJ pulses, repetition rate up to 5 MHz, and average power up to 10 W depending on the specific source. The STIM-DX Series allow for material processing at fast rates in a light-weight package.

Features：

- Custom-fit pulse energy and average powers for fs laser material processing applications
- Proven industrial reliability in the field since 2004 market introduction
- Mechanical reliability complies with MIL-STD-810F and IEC 60601 standards
- Factory-set up to 5 MHz repetition rate available
- Naturally induced Air-cooled
- Regulatory certifications available
- Complete software/remote diagnostic testing and in-field configuration

Specification:

	STIM-DX0210	STIM-DX1010	STIM-DX0320	STIM-DX0330	STIM-DX0540
Wavelength	1045 ± 5 nm
Pulse Energy	≥ 10 μJ	≥ 10 μJ	≥ 20 μJ	≥ 30 μJ	≥ 40 μJ
Pulse Duration	≤ 450 fs
Average Power	≥ 2 W	≥ 10 W	≥ 3 W	≥ 3 W	≥ 5 W
M²	≤ 1.3
Repetition Rate	100 kHz	1000 kHz	100 kHz	100 kHz	200 kHz
Beam Quality	M² ≤ 1.3
Polarization	Horizontal with respect to baseplate
Power Stability	≤ 1% rms after stabilization over ± 1 ˚C
Output Aperture Height	55.4 mm
Laser Head Dimensions	550 x 400 x 149 mm³
Laser Head Weight	≤ 25 kg
Head Heat Dissipation	Max. 80 W
Controller Dimensions	433 x 483 x 222 mm³
Controller Weight	≤ 30 kg
Power Consumption	Max. 600 W
Operating Voltage	100-120 or 200-240 VAC
Output Trigger	TTL 100 ns pulse
Operating Temperature	20-30 ºC
Storage Temperature	0-50 ºC
Warm up time	≤ 60 minutes
Cable Length	3 m

Configuration:

- Pulse Select: Allows users to select up to 15 pre-set repetition rate values; typical pre-select repetition rates range from 100 kHz to 5 MHz
- Pulse Pick: Enables operation from an on-demand single pulse to high repetition rates up to 100 kHz
- Pulse Flex: A combination of Pulse Select and Pulse Pick; offers the possibility to operate the laser from an on-demand single pulse all the way up to 5 MHz
- Harmonic Module: Attachable to the laser head to convert its output to visible and/or UV wavelengths
- Burst Mode: Provides bursts of pulses within pre-determined boundary conditions

STIM-FX Series

Proprietary Raman-shifting technology that creates a clean pulse shape and spectrum at the unique wavelength of 810 nm makes the STIM-FX series a convenient replacement for the ubiquitous Ti:Sapphire laser. This enables new possibilities for the use of femtosecond lasers in clinical and industrial settings. Since its introduction in 2005, the STIM-FX series has been a reliable workhorse in many applications. It is now available with powers up to 150 or 200 mW at 810 nm and 1620 nm. Target applications include Terahertz wave generation and detection, multiphoton fluorescence microscopy and second harmonic imaging.

Features:

- HX-150 offers continuously adjustable power at dual wavelengths
- Compact and robust design for easy integration
- Mechanical reliability complies with MIL-STD-810F and IEC 60601-1 standards
- Regulatory certifications available

Specification:

	STIM-FX-100	STIM-FX-150	STIM-HX-150		STIM-GX-200
Center Wavelength	805 ± 15 nm	810 ± 15 nm	810 ± 15 nm	1620 ± 40 nm	1620 ± 40 nm
Average Power	≥ 100 mW	≥ 150 mW	≥ 150 mW	≥ 200 mW	≥ 200 mW
Pulse Duration	≤ 120 fs	≤ 140 fs	≤ 140 fs	≤ 100 fs	≤ 100 fs
Dimensions (mm³)	230 x 193 x 76
Repetition Rate	75 ± 10 MHz
Polarization	Horizontal with respect to baseplate				Horizontal*
Power Stability	≤ 1% rms after stabilization at 25 ˚C
Output Aperture Height	43 mm
Laser Head Dimensions	230 x 193 x 76 mm³
Laser Head Weight	2kg		3kg		2kg
Head Heat Dissipation	<50 W
Controller Dimensions	267 x 267 x 133 mm³
Controller Weight	3.5 kg
Power Consumption	<250 W
Operating Voltage	100-240 VAC at 50-60 Hz
Operating Temperature	20-30 ºC
Storage Temperature	0-50 ºC
Warm up time	≤ 15 minutes
Cable Length	2 m

STIM-Femtolite Ultra Series

Introduced in 2004, the STIM-Femtolite Ultra is the most compact, reliable Erbium-doped femtosecond fiber laser on the market. It is available in a range of wavelengths and power levels. The Ultra is the descendent of the first commercial femtosecond fiber laser. Together with earlier versions, hundreds of units have been sold around the world, with very low rates of return or failure. No other laser product has the same track record of reliable performance over such long time scales.

Features:

- Compact and robust design for easy integration
- Proven reliability of the STIM-Femolite series since market introduction in 1995
- Meets stringent mechanical reliability requirements
- Complies with IEC 60068-2-27 and 60068-2-6 standards for shock and vibration
- Simple operation by controller panel or 5 V digital input

Specification:

on:

	AX-20	BX-60	CX-20		FX-10
Center Wavelength	780 ± 5 nm	1560 ± 5 nm	780 ± 5 nm	1560 ± 10 nm	810 ± 5 nm
Average Power	≥ 20 mW	≥ 60 mW	≥ 20 mW	≥ 20 mW	≥ 10 mW
Pulse Duration	≤ 100 fs				≤ 110 fs
Dimensions (mm³)	142 x 96 x 38
Repetition Rate	50 ± 2 MHz
Polarization	Vertical  with respect to baseplate
Power Stability	≤ 1% rms after stabilization  over ± 1 ˚C
Output Aperture Height	23 mm
Laser Head Dimensions	142 x 96 x 38 mm³
Laser Head Weight	0.8 kg
Head Heat Dissipation	Max. 80 W
Controller Dimensions	215 x 200 x 89 mm³
Controller Weight	2 kg
Power Consumption	<50 W
Operating Voltage	100-120 or 200-240 VAC
Operating Temperature	20-30 ºC25-35 ºC
Storage Temperature	0-50 ºC
Warm up time	≤ 30 minutes
Cable Length	2 m

STIM-FD Series

FD Series of laser is designed uniquely to deliver fs laser pulses via an optical fiber cable to user application. The laser application primarily targeting at the imaging application of proteins at 1045 nm. However, this product can serve many other applications where a handy delivery of fs pulses are required in flexible fashion. The first product of the STIM-FD Series, STIM-FD/D-FD-100S, offers over 1 W of average fiber delivered power with 200 fs along with high speed blanking function at less than 1 μs. All one-box design cooled by air allows for easy integration into workstations and laser machines. Target applications include microscopy and second harmonic imaging.

Features:

- Fiber-delivered fs pulse by 3-4 m of optical cable
- Over 1 W of fiber average power
- Integrated high speed pulse modulator
- One-box air cooled package

Specifications:

Center Wavelength	1045 ± 5 nm
Average Power	≥ 1.0 W
Pulse Duration	≤ 200 fs
Repetition Rate	50 ± 5 MHz
Power Modulation	internal AOM, <1μs
Dimensions (mm³)	500 x 540 x 270