3D Marking Head

3D Marking Head

Keywords: 3D marking system, mark head, dynamic focusing, 3D, 2D
Feb 12, 2021 View: 3680 Data Sheet

Our new excelliSHIFT extends a 2D scan head into a highly dynamic 3D system. Based on tried-and-proven galvanometer technology, its completely new design drastically improves dynamic performance compared to conventional z-axes.

LSRL Series 3D Pre-focusing Marking Heads (Scanners)

Pre-focusing deflection units are developed due to cost and size limitations on the output lens and the beam aperture limitations with 2-axis deflection units, which limit their ability to produce smaller spot sizes over medium size scanning fields. Pre-focusing deflection units meet customers application requirements for large processing fields with smaller spot sizes and allow the user to change the working distance, field and spot size with the same deflection unit. 3-axis technology also benefits application-on-the-fly with moving targets, while in 3D-applications, the setup enables processing of non-flat parts or uneven surfaces and high power products. These solutions are now available for Nd:YAG, diode, and CO2-lasers.

FUNCTIONAL DESCRIPTION

In a pre-focusing deflection unit, the laser beam first enters a moving lens - the Linear-Translator-Module. A moving lens diverges the beam rapidly before it passes one or two focusing lenses. Then the beam hits a deflection unit that directs the laser towards any X-Y position inside the marking field.

In a deflection unit without focus correction, the focused laser spot at the centre of the field describes an arc when moved in either axis, creating a sphere of focused points above the working field. At locations away from the centre of the working field, the laser beam is not focused. This is due to the increased length from the lens to the workpiece, as the scanners direct the beam away from the centre of the field.

In a pre-focusing deflection unit, focus compensation is accomplished by slight adjustments in the distance between the moving lens and the focusing lens, as the scanners direct the beam across the working field by a third moving Z-axis, hence the name “pre-focusing deflection unit”.

  • Large, pre-adjustable processing field sizes from 250 x 250 mm² to 850 x 850 mm²

  • Dust-proof with additional protective window and optional monitoring

  • “High Power” version for welding in the e-mobility market or “High Dynamic” version for the powder-bed process (SLM) in additive manufacturing

  • Integrated fiber collimator and integrated process light output

HIGHLY PRACTICAL, EASILY INTEGRATED

YOUR BENEFITS: The deflection system can be easily integrated into any laser system by means of various mechanical interfaces below, to the side (robot flange is possible) and from above. The integrated fiber collimator enables connection of the laser fiber without beam path alignment. A second external protective window can be quickly and easily replaced, with optional monitoring available. Camera and welding monitoring systems can be adapted to the process light output without aberrations. The AXIALSCAN FIBER-30 is completely dust-proof and is therefore ideal for use in a harsh industrial environment.

CONFIGURABLE THROUGH AND THROUGH: Suitable mirrors are available both for high-performance welding applications with laser power in the multi-kilowatt range and for highly dynamic applications. Optical configurations are available for all standard beam parameters of lasers and their fibers. We would also be happy to help you put together the perfect configuration for your application.

TYPICAL APPLICATIONS: The AXIALSCAN FIBER-30 is the result of our continuous and heavily market-oriented enhancement of the AXIALSCAN model range for fiber-coupled laser applications; ideal for welding in the e-mobility market with optional laser beam modulation or for powder-bed machines in additive manufacturing (SLM). Combined into a “quadruple design”, the productivity of one AM machine is boosted fourfold for each processing field. The integrated process light output enables the connection of application-appropriate process monitoring sensors, thereby allowing quality parameters to be guaranteed and documented.

INNOVATION AND QUALITY: Innovation and maintaining high product quality standards are our priorities at RAYLASE. All our products are developed, built and tested in our own laboratories and production facilities. Through our world-wide support network we can offer best maintenance and rapid service for our customer.

Specifications of LSRL-AS-FIBER-30

  • Power supply: Voltage: +48 V; Current: 4 A, RMS, max. 8 A; Ripple/Noise: Max. 200 mVpp@ 20 MHz bandwidth

  • Ambient temperature: +15°C to +35°C

  • Storage temperature: -10°C to +60°C

  • Humidity: ≤ 80 % non-condensing

  • IP Code: 64

  • Interface signals: Digital RL3-100 protocol 20 Bit and XY2-100 protocol 16 Bit or SL2-100 protocol 20 Bit

  • Wavelengths and substrates: 1060nm – 1080nm, QU; 1060nm – 1090nm + AL (QU = quartz; SC = silicon carbide)

  • Vector-Tuning (VC): Optimized tuning for a wide range of applications with emphasis on processing speed

  • Hatching Tuning (H): Optimized tuning for high precision beam deflection and fastest beam direction change during hatching


StandardHPS*
Typical deflection (optical)± 0.384 rad± 0.384 rad
Resolution XY2-100-E 16-Bit12 μrad12 μrad
Resolution RL3-100 / SL2-100 20-Bit0.76 μrad0.76 μrad
Repeatability (RMS)< 2.0   μrad< 0.4   μrad
Position noise (RMS)< 3.2   μrad< 2.0   μrad
Temperature DriftMax. Gaindrift ¹15 ppm/K8 ppm/K
Max. Offsetdrift ¹10 μrad/K15 μrad/K
Long-term drift 8 h without water   temperature control ¹< 60 μrad< 50 μrad
Long-term drift 8 h with water   temperature control ¹, ²< 40 μrad< 30 μrad

Remark: 1. Angles optical. Drift per axis, after 30 min warm-up, at constant ambient temperature and process stress. 2. After 30 min warm-up, under varying process loads, with water temperature control set for ≥ 2 l/min and 22˚C water temperature. 3. HPS* is High Performance System.

Deflection unitLSRL-AS-FIBER-30
Laser fiber socketQBH
Position of fiber socketoptional   above (T) or behind (R)
Weight (kg)approx. 12
Dimensions excluding fiber socket and   electrical plug connections (L x W x H) (mm)270.0 x   140.0 x 320.0

Typ.   beam divergencemax.   beam divergence
Optical sets for fiber coupling¹1/e² full angle1/e² full angle
Single-mode laser, fiber core 10 μm or   multi-mode laser BPP approx. 3.5 mm x mrad, fiber core 100 μm140 mrad150 mrad
Single-mode laser, fiber core 14 μm100 mrad110 mrad
Single-mode laser, fiber core 20 μm80 mrad90 mrad
Single-mode laser, fiber core 30 μm50 mrad64 mrad

Remark: 1. Optical sets optimized for maximum beam divergence


LSRL-AS-Fiber-30-QULSRL-AS-Fiber-30-SCLSRL-AS-Fiber-30-SC-HPS
TuningVCHH
Processing   speed (rad/s)503030
Positioning   speed (rad/s) ¹503030
Tracking   error deflection unit (ms) ²0.480.230.25
Step   response time at 1% of full scale (ms) ³1.20.70.66
Tracking   error focusing unit (ms)1.51.51.5
Speed   of moving lens (mm/s)880880880

Remark: 1. See “Calculation of speed”. 2. Calculation acceleration time approx. 1.7 x tracking error. 3. Setting to 1/5,000 of full scale.

Calculation of maximum speed in field:

1 rad/s @ ± 0.384 rad deflection (44°)

0.13 m/s for 100 mm working field size.

Example: AXIALSCAN FIBER-30 QU, Working field size 400 mm × 400 mm (field factor = 4), Positioning speed 50 rad/s => 50 × 0.13 m/s × 4 = 26 m/s.

Note: Lower speeds may be produced by the linear translator module, depending on which control card is used, the laser job, field size and optical configuration.

Options:

AXIALSCAN FIBER-30 deflection units offer the option of water cooling (W) of the electronic components and galvanometer scanner along with air-cooling (A)

for the deflection mirrors (> 2 kW laser power for SC-mirrors and > 3 kW laser power for QU-mirrors).

This ensures constant working conditions and excellent long-term stability and guarantees reliable operation of high-power laser applications.

AXIALSCAN FIBER-30 deflection units can also be operated without water cooling. Without water cooling, drift values may increase.

Option of additional protective window:

Each AXIALSCAN FIBER can be equipped with an optional extra protective window. This external protective window is housed under a flap and is quickly replaced.

This ensures fast and easy replacement of the protective window under harsh conditions in dusty environments. This means that all cleaning of the protective window

is done externally and the system is operational again after a very short time.

An optional automatic monitoring of the level of contamination of the protective window is currently in development.

LSJC Series 3D Marking Heads (Dynamic Focusing Scanners)

laser marking heads

Part numberMax entrance dia. mmDC power supply, VDimension LxWxH,mm
LSJC-xxxx-3D72101024
LSJC-xxxx-3D22071224262x110x110
LSJC-xxxx-3D82202024
LSJC-xxxx-3D82303024556.3x176x158
LSJC-xxxx-3D83303024
Part NumberLSJC-1064-10-3D7210-300LSJC-355-10-3D7210-200LSJC-xxxx-12-3D2207
Input Aperture10mm10mm12mm
Mark field300x300mm200x200mm
Linearity99.9%99.9%99.9%
Small step response time0.3ms0.3ms0.45ms
Maximum Scan Angle±15°±15°±15°
Resolution12μrad12μrad12μrad
Repeatability8μrad8μrad8μrad
Working Temperature0-45℃0-45℃0-45℃
Storage Temperature-10 to +60℃-10 to +60℃-10 to +60℃
Input Voltage±24VDC±24VDC±24VDC
Interface Signal DigitalXY2-100XY2-100XY2-100
Dimension(L×W×H)

262x110x110
Part NumberLSJC-1064-20-3D8220-500LSJC-10.6-30-3D8230-300LSJC-10.6-30-3D8330-1200
Input Aperture20mm30mm30mm
Mark field500x500mm300x300mm1200x1200mm
Linearity99.9%99.9%99.9%
Small step response time0.8ms1.2ms1.2ms
Maximum Scan Angle±15°±15°±15°
Resolution12μrad12μrad12μrad
Repeatability8μrad8μrad8μrad
Working Temperature0-45℃0-45℃0-45℃
Storage Temperature-10 to +60℃-10 to +60℃-10 to +60℃
Input Voltage±24VDC±15VDC±15VDC
Interface Signal DigitalXY2-100XY2-100XY2-100
Dimension(L×W×H)
556.3x176x158

LSSL Series 3D Marking Heads

1. LSSL excelliSHIFT 3D Marking Heads

Our new excelliSHIFT extends a 2D scan head into a highly dynamic 3D system. Based on tried-and-proven galvanometer technology, its completely new design drastically improves dynamic performance compared to conventional z-axes. The Z-scanner is no longer a limiting factor, so that identical acceleration can be achieved in all in all three spatial directions. This opens up entirely new possibilities for laser processing of 3-dimensional, complexly-shaped surfaces. Moreover, the new technology uses no transmissive optical components. That means dispersion effects are avoided when working with different wavelengths, and thermal-lens effects are minimized, too.

Features:

  • Highest reliability due to field-proven galvanometer technology

  • High-dynamic processing of complex 3D-surfaces

  • Designed without transmissive optical components

  • Flat field correction of pre-focused systems without dynamic limitations

  • Position-independent mounting

Applications:

  • Micromachining

  • Marking of curved surfaces

  • Deep engraving

  • Ultra-fast 3D processing

Specifications:

Part numberLSSL-14-excelliSHIFT
Aperture14mm
Wavelength515nm – 532nm, 1030nm – 1070nm (1)
Beam expansion1-fold
Tracking error0.1ms
Beam guidanceReflective
Dimensions WxHxD(115x160x142)mm3
Weight3.7kg
Laser power (with cooling)120W, green; 200W, IR
Focus range (2)±14mm
Focus speed in image field (2)Up to 30m/s

(1) Other wavelengths availabe on request

(2) With f-theta lens f = 160mm; at large focal lengths, corresponding higher values are achieved

2. Z-Scanner Module

We also offer Z-Scanner modules. The varioSCAN can extend XY scan systems into 3D beam deflection systems. The laser focus is guided along the contour of the workpiece being processed, thus enabling processing in three dimensions.

During the scanning process, a perging optic in the varioSCAN is positioned with high dynamics along the optical axis with respect to a stationary focusing optic. This produces a change in the system’s overall focal length, synchronized with the mirror motion. The varioSCAN focusing unitcan thereby expand 2D scan systems into 3-axis scan systems.

Specifictions:


varioScan 20varioScan 40
Beam input apertureUp to 8mmUp to 16mm
Output apertureUp to 20mmUp to 40mm
Motor – maximum lens travel±1mm±1.5mm
Motor – tracking error0.9ms1.4ms
Motor – typical travel speed≤140mm/s≤100mm/s
Motor – repeatability<1µm<1µm
Motor – nonlinearity1.5% FS1.5% FS
Motor – long-term drift

(over 8 hours, at constant environmental conditions)

<6µm<10µm
Power requirements±(15+1.5)V DC, max. 1.5A each±(15+1.5)V DC, max. 1.5A each

Samples:

LSRM Series 3D Marking Heads

Part numberMax entrance dia. mmControlDC power supply, VDimension
LxWxH,mm
LSRM-1064-6-QPT6XY2-10015254x97x105
LSRM-1064-7.2-QPT7.2XY2-10015254x97x105
LSRM-1064-8.4-QPT8.4XY2-10015254x97x105
LSRM-532-3.3-QPT3.3XY2-10015274x109x116
LSRM-532-4-QPT4XY2-10015274x109x116
LSRM-532-4.6-QPT4.6XY2-10015274x109x116
LSRM-xxxx-QP20
XY2-10015350x140x188
LSRM-xxxx-QP30
XY2-10015400x155x194

1. LSRM-QPT: 3D Post-Scanning Solution

(Refer to LSRM-Q datasheets for 2D marking heads)

This solution includes a 2D galvoscanner system LSRM-Q Series, a dynamic focusing unit Proton Series, F-theta lens and a galvo system controller LSRM-UMC4. It uses the post-objective scanning technology, the working volume is about 150*150*45 with the FL 210mm F-theta lens. The advantages are fast marking speed, small focal spot and low power loss.

Laser typeNd:YAGNd:YAG doubled
Wavelength1064nm532nm
Beam expansion factor1.673
Input aperture6mm/7.2mm/8.4mm3.3mm/4mm/4.6mm
Scan head apertures10/12/14mm10/12/14mm
Focus range in Z-direction±22.5mm (1)±2.5mm (2)
Tracking error time700us700us
Dimension254x97x105mm274x109x116mm
Remarkds: (1) The focal length of the f-theta lens is 210mm; (2) The focal length of the f-theta lens is 100mm. All the above parameters are theoretical.

2. LSRM-QP20/30: 3D Pre-Scanning Solution

(Refer to LSRM-Q10/12/14 datasheet for 2D marking heads)

LSRM-QP20/30: 3D Pre-Scanning Solution includes a 2D galvoscanner system LSRM-Q, a dynamic focus unit Proton series, and a galvo system controller LSRM-UMC4. It uses the Pre-Objective Scanning technology to realize the large field and 3D laser application. The advantage of this system: fast, small focal spot, small power loss.

CO2 laser configuration example: LSRM-QP30

Scanning field600x600mm800x800mm
Focal spot diameter364um487um
Working distance502mm777mm
Resolution9um12um

Nd:YAG laser configuration example: (λ=1064nm) LSRM-QP20/30

Scanning field400x400mm600x600mm800x800mm
Focal spot diameter
QP-2034um52um
QP-30-36um48um
Working distance
QP-20502mm777mm
QP-30-777mm1051mm
Resolution6um9um12um

UV laser configuration example: LSRM-Q14 + Proton

Scanning field400x400mm600x600mm
Focal spot diameter17um26um
Working distance520mm795mm
Resolution6um9um
  • All of the above parameters are theoretical values.

  • Distance between edge of deflection unit and working surface. This distance is dependent on the product model and will vary with laser pergence and objective tolerance.

  • Actual spot size and writing speed are dependent on material and application.

  • Submit Inquiry
  • Send us a message

    CLOSE