EO Q-switched Nd:YAG Laser

EO Q-switched Nd:YAG Laser

Keywords: Nd:YAG Laser, EO Q-switched laser, EOQ,
Nov 26, 2020 View: 5261 Data Sheet

EO Q-switched lasers with 1064nm/532nm/355nm/266nm energy up to 10J at 10Hz 1064nm repetition rate up to 30Hz. They have high reliability and stability.

1. STHE Series EO Q-switched Lasers

1.1 STHE Series High Energy EO Q-switched Nd: YAG Lasers

The lamp pumped Q-switched laser is a high energy laser with high stability, high conversion efficiency and high quality laser beam. With compact structure, easy installation and convenience to move, there are many options such as double pulse or more impulsive intervals and pulse output range. The system is equipped with adjustable control box and computer interface hand size limit, suitable for space and requirements and other equipment outside applications.

EO Q-swthced lasers

Features:

  • Super gauss beam output

  • Maximum output power can reach 100 joules

  • Industrial design, good reliability and no adjustment

  • Manual control box control, also can use computer operation

Typical Applications:

  • Laser rangefinder

  • Laser radar

  • Laser remote sensing

  • Strong Field of physics

  • Pump OPO lasers, fast, dye laser pump, Raman lasers

  • Laser fluorescence inspire

  • Plasma measurement

  • Optoelectronic detection

  • Optoelectronic countermeasures

Specifications:

ModelSTHE-1000STHE-2000STHE-5000STHE-10000STHE-20000STHE-50000STHE-100000
Pulse Width (FWHM)-A:<10ns,    -B:<2ns;     -C:<200ps
(-S) for single pulse design;  (-D) for double pulse design;   (-T) for multi pulse design
Energy (m J) on different Wavelength1064nm10002000500010,00020,00050,000100,000
532nm500100025005000OptionOptionOption
355nm200400OptionOptionOptionOptionOption
266nm80150OptionOptionOptionOptionOption
213nm1530OptionOptionOptionOptionOption
Beam Mode-M (TEM00);       -V(VRM)
Repeat Frequency1-10Hz1-5 Hz
Work methodPulsed
Power instability rateExcel than 3%
Pump methodLamp pumped
Beam Diameter<10mm<16mm<20mm<25mm<25mm<25mm
Divergence<0.5mrad<0.3mrad
Cooling methodpure water cooling (-W) ( or anti-freezing liquid cooling –A)
CurrentAC220V±20V/10A/50Hz±1
Voltage1 phase3 phases
Marking head Size (mm)450×100×120  
(L×W×H)
650×200×120
(L×W×H)
800×300×120
(L×W×H)
800×300×220
(L×W×H)
800×500×320
(L×W×H)
900×500×420
(L×W×H)
1200×600×420
(L×W×H)

1.2 STHE Series 532nm EO Q-switched Lasers

EOQ

Part numberSTHE-532-400
Laser Wavelength532nm
Pulse Energy≥400 mJ
Initial Beam Diameter8 mm
Pulse width≤8ns
PRF (Variable up to 10 Hz)1-10 Hz
Single pulse operationYes
Divergence @ 532 nm≤0.5 mrad
Line width≤2 cm-1
PC interfaceUSB/RS232/Ethernet
Power Requirement220V, 50 Hz AC
Weight with second harmonic9.6 Kg
Integrated Cooling unit with power supply< 30 Kg

1.3 Low-medium Power 1064nm ns Lasers

EO Q-switched oulse laser

Our compact lamp-pumped EO Q-switched nano-second laser is a low-medium energy pulsed solid-state laser. It has the features of small size, easy operation, stability. It also has a good reliability due to modular design. Thus these lasers are widely used in LIBS measurement, OPO pumping, laser cleaning etc.

Features:

  • Compact in size for easy integration

  • Sealing in water and air

  • All-in-one design

  • Red pilot available upon request

  • TEM00/VRM beam mode output

  • Controllable via mobile phone or computer

Typical Applications:

  • LIBS measurement

  • Laser radar

  • Laser cleaning

  • Pump OPO lasers, fast, dye laser pump, Raman lasers

  • Plasma measurement

  • Laser communications

Specifications:

EO Q-switched pulse laser

  • Part number: STHE-P-200

  • Laser wavelength: 1064nm

  • Pulse energy: >=200mJ@1064nm

  • Energy stability: <=2%

  • Pulse repetition rate: 1Hz

  • Pulse width: <=15ns

  • Beam diameter: 6mm~10mm

  • Beam divergence: £1mrad

  • Pumping: flashlamp pumping

  • Warm up time: <10min

  • Store temp: -15-45℃

  • Environment humility: 20%-70%

  • Power input: 230VAC, 50Hz, single phase

  • Laser head dimension: 375x115x89 mm (LxWxH)

  • Laser head weight: 7.2kg

  • Power supply weight: 42kg

2. STLT Series EO Q-switched Nd:YAG Lasers

2.1 STLT Series High Energy EO Q-switched Nd: YAG Lasers

This series product is compact with a special EO Q-switch. They can provide high efficiency and stable signal pulse energy at 1064nm and the pulse width can be adjusted from 0.5μs to2.0μs.

Features:

  • Very compact and stable design;

  • Easy flash lamps replacement;

  • Energy can be adjusted from 15mJ to 400 mJ

  • Highly flexible design with repetition rate from 1Hz, 5Hz, 10Hz & 20Hz;

  • Can provide multiple triggering capabilities, such as internal trigger, external TTL trigger. Control lamps and Q-switch for precise laser pulse timing control.

  • Convenient operation. Controlled by single power supply and equipped with closed- loop water cooling system;

  • Thermally compensated resonator assures stable operation.

Typical Applications:

  • Burning blaze detected;

  • Laser Medical

Repetition Rate1, 5, 10, 20Hz
Energy>100mJ @ 1064nm, max. 800mJ
Energy Stability±< 5%
Pulse Width0.5 - 2.0μs
Power Supply220V 50Hz AC
Cooling Systemclosed- loop water cooling system

Remarks: We also supply the customized lasers, such as four laser beams or more beams products.

Ordering Information: STLT-xxxx-yyy-zzz, where xxxx means wavelength in nm, yyy means pulse energy in nJ and zzz means pulse repetition rate in Hz.

2.2 STLT Series PIV Lasers

These lasers have dual or multiple laser-heads with compact size. They can provide high efficiency and stable green light source for Particle Image Velocimetry (PIV) applications. It is suitable for most liquid experiments and many air-based 2D/3D PIV ones.

EO Qswitched lasers

Features:

  • Very compact and stable design;

  • Easy flash lamps replacement;

  • Energy can be adjusted from 15mJ to 400 mJ

  • Highly flexible design with repetition rate from 1Hz to 15Hz or 1Hz to 30Hz;

  • Can provide multiple triggering capabilities, such as internal trigger, external TTL trigger. Control lamps and Q-switch for precise laser pulse timing control.

  • Convenient operation, Control by single power supply and equipped with closed- loop cooling system;

  • Thermally compensated resonator assures stable operation;

Typical Applications:

  • Suitable for liquid experiments;

  • Air-based 2D/3D PIV;

  • Wind tunnel research;

  • Water tunnel research;

  • Micro-fluidic measurement;

  • Spray or flame research

  • Thermally compensated resonator assures stable operation;

Specifications:

ModelSTLT-600STLT-610STLT-620STLT-630STLT-640STLT-650STLT-660STLT-670
Repetition Rate (Hz)153015151510100200
Pulse Energy(mJ)
532nm
30308012020036010050
Energy Stability (RMS)(%)532nm33444444
Wavelength532532532532532532532532
Beam Size≤4≤4≤7≤7≤8≤10≤7≤7
Pulse width (ms)≤10≤10≤10≤10≤10≤10≤10≤10
Divergency (mrad)≤3≤3≤3≤3≤3≤2≤4≤4
Spatial ProfileVRM ModeVRM ModeVRM ModeVRM ModeVRM ModeVRM ModeVRM ModeVRM Mode
Timing Jitter (ns)≤2≤2≤2≤2≤2≤2≤2≤2

Remarks: We also supply the customized lasers, such as four laser beams or more beams products

3. STLB Series EO Q-switched Lasers

3.1 STLB-LA Series Air-cooled EO Q-switched DPSS Lasers

  • Diode pumped with 1 billion shots lifetime

  • Air cooling without maintenance

  • EOQ switched with accurate timing

  • 1064 nm with over 80 mJ energy output

  • Higher harmonics available

  • Portable design with compact size

  • Easy for system integration

STLA series DPSS lasers are with uniform pumping and conduction cooling technologies to realize real portable nanosecond laser source. This series provide the new solution to various scientific, industrial and military applications.

Diode pumping has the features such as low energy consumption, high efficiency and long lifetime. TEC conduction cooling technology is used to avoid any water usage while keeping the operation stability. Electro-optical Q-switched technology is used to provide accurate timing, which is key to analysis instrument.

Based on all these features, our lasers are the perfect choice for applications like LIDAR, mass spectroscopy, laser ultrasonic and LIBS.

Part number
STLB-LA-20-xxxxSTLB-LA-80-xxxx
Pulse repetition rate (Hz)
1-10020
Pulse energy (mJ)1064nm2080

532nm1250

355nm415

266nm28
Energy stability2 RMS1064nm<1%<0.5%

532nm<2%<2%

355nm<4%<4%

266nm<4%<4%
Pulse width3 (ns)
1010
Divergence4 (mrad)
22
Pointing stability (urad)
<50<50
Beam dia.5 (mm)
34
Polarization
HorizontalHorizontal
Jitter6 (RMS) (ns)
<1<1
Cooling
AirAir
Power input
220VAC/50-60Hz, 10A220VAC/50-60Hz, 10A
Power consumption (W)
800800
Operation temp. (oC)
5-305-30
Storage temp. (oC)
5-505-50
Dimension7 (mm)Head413x160x128413x160x128

Power380x323x89380x323x89
  1. All the specifications unless otherwise stated are for Q-switched 1064nm operation. The xxxx in the part numbers is laser wavelength.

  2. Dev to average (shot to shot for 99% of pulses)

  3. Full width half max. (FWHM)

  4. Full angle at 1/e2 of the peak

  5. With respect to external trigger

  6. Measured at the laser output

  7. All the dimensions are the lasers with 4th harmonic generation (266nm).

3.2 STLB-DA Series Lamp-pumped EO Q-switched Nd:YAG Lasers

  • Fundamental wavelength covers 10-300 mJ output

  • Higher harmonics available

  • Module design and easy to use

  • Industrial design to ensure long term operation

  • Humanization design and easy for integration

  • Customization version available

STLB-DA series lasers are designed for an industrial level laser that greatly fits OEM system integration. The energy level is relatively low, from 10-300 mJ. The SHG, THG and FHG are available.

The lasers provides both multimode and variable reflectivity mirror (VRM) mode beam with good beam quality. The scientific and industrial design ensures the good beam quality. Features as optical shutter, flow sensor, power supply interlock make sure the safety use as the top priority. The lasers passed CE certification in 2014.

The lasers are suitable for many applications, including LIBS, LIDAR, LIF, PIV, laser ultrasonic, laser spark plug, laser cleaning, LCD repair etc.

Part number
STLB-DA-50-xxxxSTLB-DA-100-xxxxSTLB-DA-200-xxxxSTLB-DA-300-xxxx
Pulse repetition rate (Hz)
1-201-201-201-10
Pulse energy (mJ)1064nm50100200300

532nm2550100150

355nm10204060

266nm5102030
Energy stability2 RMS1064nm<1%<1%<1%<1%

532nm<2%<2%<2%<2%

355nm<4%<4%<4%<4%

266nm<4%<4%<4%<4%
Pulse width3 (ns)1064nm<9<9<8<7

532nm<8<8<7<6

355nm<7<7<6<5

266nm<7<76<5
Divergence4 (mrad)1064nmMulti-mode, <3mrad;
Flat-top, <1rmad
Multi-mode, <3mrad;
Flat-top, <1rmad
Multi-mode, <3mrad;
Flat-top, <1rmad
Multi-mode, <3mrad;
Flat-top, <1rmad
Pointing stability (urad)
<50<50<50<50
Jitter5 (RMS) (ns)
<1<1<1<1
Beam dia.6 (mm)1064nm5567
Spatial mode profileNear field>70%>70%>70%>70%

Far field>95%>95%>95%>95%
Cooling
Air to waterAir to waterAir to waterAir to water
Power input
220VAC/50-60Hz, 10A220VAC/50-60Hz, 10A220VAC/50-60Hz, 10A220VAC/50-60Hz, 10A
Power consumption (W)
500500500500
Cable length (m)Control3333

Power1.81.81.81.8

Umbilical3333
Operation temp. (oC)
5-305-305-305-30
Storage temp. (oC)
5-505-505-505-50
Dimension7 (mm)Head579x193x95579x193x95579x193x95579x193x95

Power473x216x563473x216x563473x216x563473x216x563
  1. All the specifications unless otherwise stated are for Q-switched 1064nm operation. The xxxx in the part numbers is laser wavelength.

  2. Dev to average (shot to shot for 99% of pulses)

  3. Full width half max. (FWHM)

  4. Full angle at 1/e2 of the peak

  5. With respect to external trigger

  6. Measured at the laser output

  7. All the dimensions are the lasers with 3th harmonic generation (355nm).

3.3 STLB-NI Series Lamp-pumped EO Q-switched Nd:YAG Lasers

  • Compact size

  • High uniformity of beam profile

  • Industrial design to ensure long term operation

  • High SHG and UV efficiency

  • Built to withstand various environment

  • Easy for system integration

STNI series lasers are middle energy level Q-switched nanosecond Nd:YAG laser. The fundamental wavelength covers energy level from 400 mJ to 2000 mJ. These lasers possess the features of compact size, good pointing stability, high energy stability, high reliability, etc. The SHG, THG and FHG are available.

These lasers provide two types of laser mode, multimode and VRM mode. The scientific and industrial design ensures the good beam quality. Features as optical shutter, flow sensor, power supply interlock make sure the safety use as the top priority.

Up to now, around 4000 units have been delivered all over the world. They are the perfect choice for various kinds of scientific and industrial applications such as pump dye laser, pump OPO, pump Ti:Sapphire laser, laser shock peening, LCD repair, laser ablation, laser sintering, LIDAR.

Part number
STLB-NI-400-xxxxSTLB-NI-600-xxxxSTLB-NI-900-xxxxSTLB-NI-Extra-xxxx
Pulse repetition rate (Hz)
1-101-101-101-10
Pulse energy (mJ)1064nm4506509002000

532nm2503504801000

355nm90150270600

266nm506590150
Energy stability2 RMS1064nm<=1%<=1%<=1%<=1%

532nm<=2%£2%<=2%<=2%

355nm<=4%<=4%<=4%<=4%

266nm<=4%<=4%<=4%<=4%
Pulse width3 (ns)1064nm<=9<=9<=9<=9

532nm<=8<=8<=8<=8

355nm<=7<=7<=7<=7

266nm<=7<=7<=7<=7
Divergence4 (mrad)1064nm<=0.6<=0.6<=0.6<=0.5
Pointing stability (urad)
<=30<=30<=30<=50
Jitter5 (RMS) (ns)
<=1<=1<=1<=1
Beam dia.6 (mm)1064nm88911
Spatial mode profileNear field>70%>70%>70%>70%

Far field>95%>95%>95%>95%
PolarizationHorizontal1064/355/266nm1064/355/266nm1064/355/266nm1064/355/266nm

Vertical532nm532nm532nm532nm
Cooling
Air to waterAir to waterAir to waterChiller
Power input
220VAC/50-60Hz, 10A220VAC/50-60Hz, 10A220VAC/50-60Hz, 10A220VAC/50-60Hz, 10A
Power consumption (kW)
2223
Cable length (m)Control3333

Power1.81.81.81.8

Umbilical3333
Operation temp. (oC)
5-305-305-305-30
Storage temp. (oC)
5-505-505-505-50
Dimension7 (mm)Head810.5x150x142810.5x150x142810.5x150x142820x290x136

Power568x296x590568x296x590568x296x590568x296x590
  1. All the specifications unless otherwise stated are for Q-switched 1064nm operation. The xxxx in the part numbers is laser wavelength. For example, STNI-400-532 is 532nm laser and it includes 1064nm and 532nm modules.

  2. Dev to average (shot to shot for 99% of pulses)

  3. Full width half max. (FWHM)

  4. Full angle at 1/e2 of the peak

  5. With respect to external trigger

  6. Measured at the laser output

  7. All the dimensions are the lasers with 4th harmonic generation (266nm).

3.4 STLB-SGR Series Q-Switched Nd:YAG Laser

STLB-SGR Series Super-Gaussian Resonator series Q-Switched Nd:YAG lasers combine VRM (variable reflectivity mirror) with unstable resonator design creating a cavity with large TEM00 mode volume for excitation and energy extraction. A “flat-top-hat” can be specified with uniform energy distribution or “VRM Gaussian” profiles.

STLB-GR Series close-coupled diffuse pump chamber delivers uniform pumping of the laser rod for optimum lasing excitation efficiency and allows for higher stored energy by eliminating parasitic oscillations within the pump chamber. The pump chamber uses chemically inert materials to withstand high pumping energy and absorb unwanted UV and IR radiation emitted by the flash lamps. One or more amplifiers can be added to the oscillator for higher energy output. With scientific or industrial grade models available, the STGR series will fit right in with your scientific research, medical or OEM industrial application.

Features:

  • Fundamental wavelength covers 2-6 J output

  • Higher harmonics available

  • Repetition rate up to 50 Hz

  • Injection seeded for narrow linewidth

  • RS232 and TTL interface for remote or external control

  • Invar structure inside

Applications:

  • Photo chemistry

  • Molecular chemistry

  • Non-linear optics

  • Laser illumination

  • LIDAR

  • Laser cleaning

  • Laser ablation

  • Optical remote sensing

  • LIF (Laser Induces Florescence)

  • PLD (Pulsed Laser Deposition)

  • Plasma diagnostics

Technical Specifications

Part no.
STLB-SGR-10STLB-SGR-20STLB-SGR-30STLB-SGR-40STLB-SGR-50STLB-SGR-60
Rep. rate
1010203050510510510510
Energy (mJ)1064nm1000200020002000150030003000400040005000500060006000

532nm50010001000100075015001500200020002500250030003000

355nm250500400400300750750100010001250125015001500

266nm901801009050250200300300400350500400
Power stability2 RMS1064nm<1%

532nm<2%

355nm<4%

266nm<4%
Power drfit31064nm<3%

532nm<5%

355nm<6%

266nm<8%
Pulse width4
1064nm: 8-10ns; other wavelength: 7-10ns
Spatial profile5Near field>70%

Far field>90%
Beam dia.6 (mm)
10121212121515151517172020
Divergence7
<0.5mrad
Pointing stability
<50urad
Jitter8 (RMS)
<1ns
LinewidthStandard<1cm-1

Injection seeded<0.0031cm-1
Part no.
STLB-SGR-S400STLB-SGR-S500STLB-SGR-S600STLB-SGR-S600
Rep. rate (Hz)
1020/30/5020/3010
Energy (mJ)1064nm400500600800

532nm200250300400

355nm100100150200

266nm40405080
Divergence7
<0.7mrad<0.5mrad<0.5mrad<0.5mrad
Beam dia.8
8mm8mm8mm8mm
Other specifications
Please refer to the table abovePlease refer to the table abovePlease refer to the table abovePlease refer to the table above
  1. All specifications unless otherwise stated are for 1064nm operation.

  2. Dev. To average (shot to shot for 99% of pulses).

  3. Average for 8 hours with room temp. variation less than +/-3 deg.

  4. Full width half max (FWHM)

  5. Near field profiles measured at the focal plane, least square fit to Gaussian profile.

  6. Measured at the laser output.

  7. Full angle at 1/e2 of the peak.

  8. With respect to external trigger.

Other Specifications



STLB-SGR-SSTLB-SGR-10STLB-SGR-20/30/40STLB-SGR-60
Size (LxWxH) (mm)Laser head1162x333x290.51162x410x290.51162x410x290.51266x565x243

Power supply476x443x200914x520x737914x520x737914x520x737

Cooling systemN/AN/A240x170x70836x688x1125
Power input
220V-50Hz-16A220V-50Hz-16A220V-50Hz-16A380V-50Hz-25A
Operation temp.
5-30oC5-30oC5-30oC5-30oC
CablesControl line3m3m3m3m

Power line1.8m1.8m1.8m1.8m

Umbilical line3m3m3m3m

3.5 STLB-SGRE Series High-energy EO Q-switched Lasers

EO Q-switched laser

STLB-SGRE series lasers have been developed since 2007 as high energy nanosecond laser systems which are suitable for laser peening, pump source, plasma physics, etc. STLB-SGRE series lasers provide the customization service. Specifications such as wavelength, repetition rate, energy, pulse width, beam profile, SLM are all available for customization. We also developed and gained much experience on burst mode technique and vehicular applications during this process. As a result, we can provide the ideal laser source solution for the customer in various applications.

Main Features:

  • High output energy up to 50J@1064 nm

  • 8-26ns pulse width, high peak power

  • Unique cavity design to ensure uniform beam profile

  • Good stability for long term operation

  • Local and remote control interface with compatibility

  • Customization version available

EOQ

Applications:

  • Laser peening

  • Pump Ti:Sapphire laser

  • Plasma diagnostics

  • Nonlinear optics

  • LIDAR

  • Laser cleaning

Model1STLB-SGRE-04STLB-SGRE-06STLB-SGRE-08STLB-SGRE-10STLB-SGRE-12STLB-SGRE-15STLB-SGRE-20STLB-SGRE-25STLB-SGRE-30STLB-SGRE-40STLB-SGRE-50
Wavelength21064nm
Rep rate, Hz20/30/505/105/105/105522522
Pulse energy at 1064nm3-4J6J8J10J12J15J20J25J30J40J50J
Pulse width at 1064nm310-12ns, 15-20ns optional12-15ns, 15-20ns optional
Divergence4<=0.5mrad for VRM, <=4mrad for MM
Peak to average<=1.8:1
PolarisationLinear 100:1Cross
Energy stability5 RMS<1%
Power drift RMS<5%
Pointing stability<50urad
Jitter6 RMS<1ns
Warm up time7<5min
  • 1. All specifications unless otherwise stated are for 1064nm operation.

  • 2. SHG, THG, FGH are available upon request.

  • 3. Full width half max (FWHM). The rising time can be cut down to <5-10ns by slice as option.

  • 4. Full angle at 1/e2 of the peak.

  • 5. Dev. To average (shot to shot for 99% of pulses).

  • 6. With respect to external trigger.

  • 7. Time to full energy.

Mechanical & Utilities

Size (LxWxH), mmCustomisation
Electrical input380VAC 50Hz, 50A, 3-phase
Water coolingDistilled water, chiller
Operation temperature10-30 degree
Storage temperature0-40 degree

4. STLQ Series Nd:YAG Pulsed Lasers

4.1 Compact Air-cooled Nd:YAG Laser Model STLQ-115

Up to 90mJ @ 1064nm and built in harmonic generators 532nm, 355nm, 266nm

FEATURES:

  • No cooling water required

  • Compact & rigid design

  • Excellent beam profile

  • Continuous operation mode

  • Built-in harmonics

  • Turn-key operation

  • Remote control

The STLQ-115 is an ultra-compact model of air-cooled Nd:YAG laser for applications requiring compact and undemanding laser source.

Due to application of original high-efficiency heat exchanger the STLQ-115 laser unlike most air-cooled laser models can work continuously with PRR up to 3Hz and cyclically with PRR up to 5Hz. The above operating modes are realised at output energies conventionally attained at water-cooled lasers.

The STLQ-115 laser provides up to 90mJ output pulse energy at the fundamental with possibility of further conversion of IR radiation into the second harmonic as well as into the third or fourth harmonic.

All the harmonic generators are built-in and temperature stabilised. This peculiarity together with optimised rigid laser head design ensures output radiation long-term stability comparable to that of standard laboratory lasers.

Unlike most compact lasers using DKDP-based Pockels cells, the STLQ-115 incorporates LiNbO3 electro-optical Q-Switch. Such Q-Switch is not hygroscopic and retains its parameters within a wide temperature range and ensures reliable and stable laser operation.

Dust-proof laser head design allows to align main optical components without removing the cover that increases their life in the field.

To reduce your time expenses on routine service of the STLQ-115 laser we use only long lifetime flash lamps by Heraeus Noblelight Ltd. Besides, the flash lamp replacement procedure is elementarily easy even for a unskilled user.

Absence of water cooling system gives to the STLQ-115 laser a number of essential operational advantages:

  • Footprint of both the laser head and power supply is considerably reduced.

  • Integration of the laser into different mobile systems is facilitated.

  • Technical reliability of the device operation is increased.

  • Operating costs are reduced.

STLQ-115STLQ-115

Model(1064 nm)(532 nm)
PRR, Hz123123
Output energy, mJ, not less than1064 nm909075909075
532 nm454030
355 nm
266 nm
Pulse-to-pulse energy stability, ±%1)33.54.533.54.5

STLQ-115STLQ-115

Model(355 nm)(266 nm)
Pulse repetition frequency, Hz123123
Output energy, mJ, not less than1064 nm909075909075
532 nm353022454030
355 nm202015---
266 nm---654
Pulse-to-pulse energy stability, ±%1)33.54.533.54.5


ModelFor all the models
Pulse duration, ns1)5…9
Beam diameter, mm1)≤ 4.5
Divergence, mrad1)≤ 3
Jitter, ns2)≤ 3.5
Power consumption, W≤ 200
Dimensions (LxWxH), mmLaser head410 x 125 x 130
Power supply320 x 370 x 150

* Specifications are subject to change without notice.

  • 1)At 1064 nm.

  • 2)Relative to the Q-Switch driver external trigger pulse.

4.2 Compact Nd:YAG Laser Model STLQ-215

Up to 180mJ @ 1064nm and harmonic generators up to 213nm

FEATURES:

  • Excellent beam quality

  • Built-in harmonic generators up to 213 nm

  • Dust- and water-proof design

  • Reliability of industrial equipment

  • Compact single phase power supply

  • No need for external water

The STLQ-215 laser is built on the basis of a model produced for aerospace industry and combines excellent beam quality required for advanced scientific research with a highest reliability of industrial equipment.

Original and reliable optical scheme ensures compensation of both astigmatism and thermooptical distortions and places at your disposal laser radiation of the highest quality.

One more peculiarity of the laser optical scheme is that all the components operate at loads considerably lower than the admissible values. Such a smooth operation mode not only increases life time of the components but also ensures unique operational reliability of the whole laser. As a result, you can use the STLQ-215 laser for your experiments day-to-day and year-to-year having forgotten about repairs and other unpleasant operation costs.

All the laser optical components are installed on a rigid base fixed to the housing with specially developed dampers. Due to this, mechanical vibrations and housing stress no way influence the quality of the cavity alignment.

All the critical components of the laser are thermally stabilised which in combination with vibration-proof design ensures unsurpassed long-term output radiation stability. The efficient thermostats used in the STLQ-215 ensure warm-up time of less than 10min.

To reduce your time expenses on routine service of the STLQ-215 we provided flash lamp life time of more than 50 million pulses and foreseen easy and quick procedure of its replacement.

It should be noted that the laser design allows to replace the flash lamp without removing the laser head upper cover. Such a technical solution considerably reduces risks of the optical components contamination as well as increases operational reliability of the device.

Closed-loop water-to-air cooling system is integrated into a compact single-phase laser power supply which can be controlled both from PC and via the remote control unit.

If you plan to use the STLQ-215 in laboratory experiments, as a bonus you will get unsurpassed operational reliability and minimization of accompanying expenses.

If you are attracted by the reliability of the STLQ-215 laser and you will use it for industrial or field applications, in addition to a highest reliability you get beam quality conventionally available only for high-precision laboratory equipment.

The STLQ-215 is an ideal instrument for such applications as:

  • Ti:Sapphire Lasers and OPO Pumping

  • Dye Lasers Pumping

  • Spectroscopy

  • LIDAR

  • LIF (Laser Induced Fluorescence)

  • LIBS (Laser Induced Breakdown Spectroscopy)

  • Education

  • PIV (Particle Image Velocimetry)

  • Range-Finding

  • Ablation

  • Marking

  • TFT-LCD Repair

  • Flat Panel Display (FPD) Manufacturing

STLQ-215STLQ-215STLQ-215STLQ-215STLQ-215

Model(1064 nm)(532 nm)(355 nm)(266 nm)(213 nm)
PRR, Hz10201020102010201020
Output energy, mJ, not less than1064 nm180180180180180
532 nm-1008010080
355 nm (HPV)1)-6060-6060
355 nm5045-5045
266 nm-35-
213 nm (HPV)1),2)-86
213 nm2)65
ModelFor all the Models
Pulse-to-pulse energy stability, ±%3)< 2.5
Pulse duration, ns3)6…10
Beam diameter, mm3)≤ 5
Divergence, mrad3)≤ 1.5
Jitter, ns4)≤ 1.5
Power consumption, W≤ 500
Cooling systemwater-to-air
Dimensions (LxWxH), mmLaser head455 x 165 x 140
Power supply620 x 330 x 670
  • 1)For the high-power version at 355 nm.

  • 2)With the STLG-105 external fifth harmonic generator.

  • 3)At 1064 nm.

  • 4)Relative to the Q-Switch driver external trigger pulse.

4.3 Dual-Pulse Compact Nd:YAG Laser Model STLQ-215-D

Up to 100mJ @ 1064nm and 50mJ @ 532nm in each pulse

FEATURES

  • Excellent beam quality

  • 1064 nm or 532 nm output wavelength

  • Beam pointing stability

  • Dust- and water-proof design

  • Reliability of industrial equipment

  • Compact single phase power supply

  • No need for external water

The STLQ-215-D is built on the basis of a laser produced for aerospace industry and combines excellent beam quality required for advanced scientific research and a highest reliability of industrial equipment.

The design of conventional lasers generating dual pulse is based either on combining two lasers or on successive generation of nanosecond pulses by one active element during one flash lamp discharge pulse. The first solution allows to build a system with the maximum capabilities for the user but leads to increase of its cost and dimensions. The second approach allows to create low-cost and compact systems but leads to reduction of each pulse energy and of laser beam profile worsening and stability as well as limits the delay range between the pulses.

The STLQ-215-D design demonstrates advantages of both the variants but eliminates their disadvantages: output radiation is generated by two separate cavities while both the Nd:YAG rods are installed in one pump chamber and are pumped by one flash lamp. Both the cavities are integrated into a common laser head controlled by a common power supply that provides to the user minimum dimensions and convenience in controlling dual pulse parameters.

Original and reliable optical scheme ensures compensation of both astigmatism and thermooptical distortions and places at your disposal laser radiation of the highest quality.

One more peculiarity of the laser optical scheme is that all the components operate at loads considerably lower than the admissible values. Such a smooth operation mode not only increases life time of the components but also ensures unique operational reliability of the whole laser. As a result, you can use the STLQ-215-D laser for your experiments day-to-day and year-to-year having forgotten about repairs and other unpleasant operation costs.

All the laser optical components are installed on a rigid base fixed to the housing with specially developed dampers. Due to this, mechanical vibrations and housing stress no way influence the quality of the cavity alignment.

All the critical components of the laser are thermally stabilised which in combination with vibration-proof design ensures unsurpassed long-term output radiation stability. The efficient thermostats used in the STLQ-215-D ensure warm-up time of less than 10min.

To reduce your time expenses on routine service of the STLQ-215-D we provided flash lamp life time of more than 50 million pulses and foreseen easy and quick procedure of its replacement.

It should be noted that the laser design allows to replace the flash lamp without removing the laser head upper cover. Such a design concept considerably reduces risks of the optical components contamination as well as increases operational reliability of the device.

Closed-loop water-to-air cooling system is integrated into a compact single-phase laser power supply which can be controlled both from PC and via the remote control unit.

STLQ-215

Model-D
Maximum PRR, Hz1)20
Each pulse output energy, mJ, not less than2)1064 nm100
532nm50
Pulse duration, ns2)6…10
Adjustable delay between pulses, µs0…80
Step of adjustable delay between pulses, µs1 (0.1 – upon request)
Beam diameter, mm3)≤ 5
Divergence, mrad3)≤ 1.5
Pulse-to-pulse energy stability, ±%3)< 2.5
Beam pointing stability, mrad, not worse than3)0.1
Jitter, ns4)< 1
Power consumption, W≤ 500
Cooling systemwater-to-air
Dimensions (LxWxH), mmLaser head534 x 190 x 135
Power supply620 x 330 x 670

* Specifications are subject to change without notice.

  • 1)The laser operates at fixed PRR stipulated on placing an order. The PRR can be from 1Hz to 20Hz. All the parameters are specified for 20Hz PRR.

  • 2)The difference between pulse energies in the dual pulse does not exceed ± 5%.

  • 3)At 1064 nm.

  • 4)Relative to the Q-Switch driver external trigger pulse.

4.4 Pulsed Nd:YAG Laser Model STLQ-529

Up to 500mJ at 1064nm and harmonic generators up to 213nm

FEATURES:

  • High PRR

  • High pulse energy up to 0.5 J

  • Excellent beam quality

  • All harmonics available up to 213 nm

  • Compact single-phase power supply

  • No external water requirements

The STLQ-529 is a series of popular compact lamp-pumped Nd:YAG lasers offering uncompromising combination of the main parameters: high output power, exceptional beam quality and minimum laser head and power supply dimensions.

All the lasers of the STLQ-529 series are based on ring cavity and incorporate a pump chamber with diffuse ceramic reflector. Due to this technical solution the STLQ-529 lasers, unlike the lasers with traditional linear cavity, provide homogeneous close to flat-top laser beam profile and possess exceptional stability of output energy and spatial radiation parameters. Beam pointing stability of the STLQ-529 is better than 20 µrad in the vertical plane and 80 µrad in the horizontal plane.

All the critical components of the laser are thermally stabilised which in combination with vibration-proof design ensures unsurpassed long-term output radiation stability. The efficient thermostats used in the STLQ-529 ensure warm-up time of less than 10 min.

To reduce your time expenses on routine service of the STLQ-529 we provided flash lamp life time of more than 30 million pulses and foreseen easy and quick procedure of its replacement.

Closed-loop water-to-air cooling system is integrated into a compact single-phase laser power supply which can be controlled both from PC and via the remote control unit.

STLQ-529STLQ-529STLQ-529STLQ-529STLQ-529

ModelA (1064nm)A (532 nm)A (355 nm)A (266 nm)A (213 nm)
PRR, Hz510510510510510
Output energy, mJ, not less than1064 nm500500500500500
532 nm-280225280225
355 nm (HPV)1)-130130-130130
355 nm110100-110100
266 nm-8570-
213 nm (HPV)1),2)-2520
213 nm2)2015
Beam diameter, mm3)≤ 8
Power consumption, W≤ 600


STLQ-529STLQ-529STLQ-529STLQ-529STLQ-529

ModelB (1064 nm)B (532 nm)B (355 nm)B (266 nm)B (213 nm)
PRR, Hz10201020102010201020
Output energy, mJ, not less than1064 nm350350350350350
532 nm-190140190140
355 nm (HPV)1)-100100-100100
355 nm9080-9080
266 nm-6040-
213 nm (HPV)1),2)-1815
213 nm2)1512
Beam diameter, mm3)≤ 6
Power consumption, W≤ 800


STLQ-529STLQ-529STLQ-529STLQ-529STLQ-529

ModelC (1064 nm)C (532 nm)C (355 nm)C (266 nm)C (213 nm)
PRR, Hz50
Output energy, mJ, not less than1064nm150150150150150
532nm-80658065
355nm-40-40
266nm-20-
213nm2)-4,5
Beam diameter, mm3)≤ 5
Power consumption, W≤ 1000
ModelFor all the Models
Pulse-to-pulse energy stability, ±%2)< 2,5
Pulse duration, ns3)10…13
Divergence, mrad3)≤ 1.5
Jitter, ns4)≤ 1
Cooling systemwater-to-air
Dimensions (LxWxH), mmLaser head615 x 180 x 120
Power supply620 x 330 x 670
  • * Specifications are subject to change without notice.

  • 1)For the high-power version at 355 nm.

  • 2)With the STLG-105 external fifth harmonic generator.

  • 3)At 1064 nm.

  • 4)Relative to the Q-Switch driver external trigger pulse.

4.5 100 Hz Nd:YAG Laser Model STLQ-629

Up to 200mJ @ 1064nm and harmonic generators up to 213nm

FEATURES:

  • High PRR

  • High pulse energy

  • Excellent beam quality

  • All harmonics available up to 213 nm

  • Compact single-phase power supply

  • No external water requirements

The combination of high laser pulse energy, high PRR and excellent beam quality unattainable for most conventional models is the peculiarity of the STLQ-629 laser.

Active elements of master oscillator and amplifier are installed in one pump chamber and are pumped by a single flash lamp. The master oscillator is based on the time-proven ring cavity design ensuring excellent beam quality while the classical single-pass amplifier is supplemented with the optics compensating thermooptical aberrations.

Particularly due to this technical solution the STLQ-629 provides unique combination of parameters in a compact, reliable and inexpensive-in-operation design.

All the critical components of the laser are thermally stabilised which in combination with vibration-proof design ensures unsurpassed long-term stability of output radiation. The efficient thermostats used in the STLQ-629 ensure warm-up time of less than 10min.

To reduce your time expenses on routine service of the STLQ-629 we provided flash lamp life time of more than 50 million pulses and foreseen easy and quick procedure of its replacement.

It should be noted that the laser design allows to replace the flash lamp without removing the laser head upper cover. Such a design concept considerably reduces risks of the optical components contamination as well as increases operational reliability of the device.

Closed-loop water-to-air cooling system is integrated into a compact single-phase laser power supply which can be controlled both from PC and via the remote control unit.

STLQ-629STLQ-629STLQ-629STLQ-629STLQ-629

Model(1064 nm)(532 nm)(355 nm)(266 nm)(213 nm)
Output energy, mJ, not less than1064nm200200200200200
532nm-90809080
355nm-50-50
266nm-15-
213nm1)-5.5
ModelFor all the Models
PRR, Hz100
Beam diameter, mm2)≤ 5
Pulse-to-pulse energy stability, ±%2)± 1.5
Pulse duration, ns2)9…12
Divergence, mrad2)≤ 1.5
Jitter, ns3)± 1.5
Power consumption, W≤ 2000
Cooling systemwater-to-air
Dimensions (LxWxH), mmLaser head740 x 180 x 125
Power supply620 x 330 x 670
  • * Specifications are subject to change without notice.

  • 1)With the STLG-105 external fifth harmonic generator.

  • 2)At 1064 nm.

  • 3)Relative to the Q-Switch driver external trigger pulse.

4.6 TEM00 High-Power Pulsed Nd:YAG Laser Model STLQ-830

Up to 700mJ @ 1064nm in the TEM00 mode and harmonic generators up to 213nm

FEATURES:

  • TEM00, M2< 2

  • Oscillator-amplifier configuration

  • High pulse energy up to 0.7 J

  • Divergence of 0.25 mrad

  • High-power radiation in the VIS and UV ranges

  • All the harmonics available up to 213 nm

  • Compact single-phase power supply

  • No external water requirements

The STLQ-830 is a new model of lamp-pumped Nd:YAG laser possessing unique laser radiation characteristics: linewidth of less than 0.1 cm-1, low angular divergence of less than 0.25 mrad and high pulse energy up to 700 mJ at 1064 nm.

Master oscillator with high-stability ring cavity, preamplifier and high-power amplifier form at the laser output TEM00 diffractionally limited beam with high pulse energy and Gaussian profile in the far field.

High spectral radiation brightness with linewidth not more than 10pm and high coherence length of more than 10 cm is ensured by intracavity Fabry-Perot interferometer.

All the critical components of the laser are thermally stabilised which in combination with vibration-proof design ensures unsurpassed long-term stability of output radiation. The efficient thermostats used in the STLQ-830 ensure warm-up time of less than 10 min.

To reduce your time expenses on routine service of the StLQ830 we provided flash lamp life time of more than 30 million pulses and foreseen easy and quick procedure of its replacement.

Closed-loop water-to-air cooling system is integrated into a compact single-phase laser power supply which can be controlled both from PC and via the remote control unit.

STLQ-830STLQ-830STLQ-830STLQ-830

Model(1064 nm)StLQ830 (532 nm)(355 nm)(266 nm)(213 nm)
Output energy, mJ, not less than1064nm700700700700700
532nm-450350450315
355nm-300-300
266nm-130-
213nm1)-50


ModelFor all the models
PRR, Hz10
Beam qualityTEM00, M2<2
Divergence, mrad2)≤0.25
Beam diameter, mm2)9±0.5
Output linewidth, cm-1, not more than2)1
Output linewidth with interferometer, cm-1,  not more than2)0.1
Pulse duration, ns2),3)6…9
Beam pointing stability, µrad, not worse than2)horizontal plane
  vertical plane
±6
  ±20
Pulse-to-pulse energy stability, ±%2)≤ 2
Jitter, ns3),4)± 1
Power consumption, W≤ 1000
Cooling systemwater-to-air
Dimensions (LxWxH), mmLaser head650 x 324 x 119
Power supply700 x 366 x 693
  • * Specifications are subject to change without notice.

  • 1)With the STLG-105 external fifth harmonic generator.

  • 2)At 1064 nm.

  • 3)Without the interferometer.

  • 4)Relative to the Q-Switch driver external trigger pulse.

4.7 High-Power Pulsed Nd:YAG Lasers Model STLQ-929

Up to 1400mJ @ 1064nm and harmonic generators up to 213nm

FEATURES:

  • Oscillator-amplifier configuration

  • High pulse energy up to 1.5 J

  • Excellent beam quality

  • All the harmonics available up to 213 nm

  • Compact single-phase power supply

  • No external water requirements

The STLQ-929 is a series of compact lamp-pumped Nd:YAG lasers built under the scheme master-oscillator – one-pass amplifier and having uncompromising combination of the main parameters: high output power, exceptional beam quality and minimum laser head and power supply dimensions.

The master oscillator of the STLQ-929 laser series, just as that of the STLQ-529 has ring cavity. The principle of operation of the ring cavity scheme and utilisation of pump chambers with high-efficiency diffuse reflectors provide output laser radiation with homogeneous beam profile and exceptional stability of output energy and spatial radiation parameters.

All the critical components of the laser are thermally stabilised which in combination with vibration-proof design ensures unsurpassed long-term stability of output radiation. The efficient thermostats used in the STLQ-929 ensure warm-up time of less than 10 min.

To reduce your time expenses on routine service of the STLQ-929 we provided flash lamp life time of more than 30 million pulses and foreseen easy and quick procedure of its replacement.

Closed-loop water-to-air cooling system is integrated into a compact single-phase laser power supply which can be controlled both from PC and via the remote control unit.

STLQ-929STLQ-929STLQ-929STLQ-929STLQ-929

ModelA (1064 nm)A (532 nm)A (355 nm)A (266 nm)A (213 nm)
PRR, Hz510510510510510
Output energy, mJ, not less than1064 nm14001400140014001400
532 nm-800630800630
355 nm (HPV)1),2)-420420-420420
355 nm2)390350-390350
266 nm3)-210190-
213 nm (HPV)1),4)-4540
213 nm4)4035
Beam diameter, mm5)≤ 11


STLQ-929STLQ-929STLQ-929STLQ-929STLQ-929

ModelB (1064 nm)B (532 nm)B (355 nm)B (266 nm)B (213 nm)
PRR, Hz510510510510510
Output energy, mJ, not less than1064 nm10001000100010001000
532 nm-600450600450
355 nm (HPV)1),2)-300300-300300
355 nm2)280250-280250
266 nm3)-200180-
213 nm (HPV)1),4)-4540
213 nm4)4035
Beam diameter, mm5)≤ 10
ModelFor all the Models
Pulse-to-pulse energy stability, ±%5)< 2.5
Pulse duration, ns5)10…12
Divergence, mrad5)≤ 1.5
Jitter, ns6)±1
Power consumption, W≤ 1200
Cooling systemwater-to-air
Dimensions (LxWxH), mmLaser head625 x 220 x 125
Power supply700 x 366 x 693
  • * Specifications are subject to change without notice.

  • 1)For the high-power version at 355 nm.

  • 2)With the STLG-103T external third harmonic generator.

  • 3)With the STLG-103F external fourth harmonic generator.

  • 4)With the STLG-105 external fifth harmonic generator.

  • 5)At 1064 nm.

  • 6)Relative to the Q-Switch driver external trigger pulse.

4.8 High Pulse Energy Air-cooled DPSS Laser Model STQX-500 (1064/532/355/266nm)

We present a new model of completely air-cooled pulsed diode-pumped Nd:YAG laser. The STQX-500 delivers 160mJ at 1064 nm in nanosecond pulses at repetition rates up to 20Hz. The STQX-500 laser features long-life laser diode bars and delivers excellent pulse-to-pulse and long-term stability which is ideally suited for use in scientific, industrial, and medical applications. Diode pumping reduces size, improves reliability, and eliminates most maintenance operations. Minimum service costs are conditioned by optical pumping using laser diode bars with more than 109 pulses lifetime. Stability of the parameters and the laser reliability are guaranteed due to dustproof housing design and thermal stabilization of the optical cavity. The possibility of operation in the VIS and UV spectral range thanks to small external harmonic generators will expand your opportunities. Compact laser design and complete air cooling not only simplify application of this device as a stand-alone unit, but also allow to integrate it into any equipment.

  • High-power output of 160mJ at 20Hz

  • Air cooling and no water required

  • Smooth flat-top beam profile

  • Vis and UV harmonic generators

  • OEM/industrial design for 24/7 operation

  • Long diode lifetime over 1 billion shots

  • Turn-key operation

Wavelength,nm355
Pulseenergy,mJ
-at1064nm
-at532nm 1)
-at355nm 2)
-at266nm 3)

≥160
≥80
≥50
≥25
Pulserepetitionrate4),Hz1…20
Pulseenergystability 5) (Std.Dev.),%≤1.5
Pulsewidth5) (FWHM),ns9...10
Beamdivergence 5),mrad≤1.5
Beamdiameter 5),mm<5
Jitter(Std.Dev.) 6),ns≤1.0
Electricalservice100…240V,50/60Hz,≤500W
CoolingsystemAir
Dimensions,mm
-Laserheadandharmonicgenerators(L×W×H)
-Powersupplyunit(W×D×H)

375x230x115
405х350х150
Environmentalrequirements
Roomtemperature15-27ºС (airconditioningrecommended)
Relativehumidity≤60%(noncondensing)
  • 1)With external third harmonic generator model STQH-120;

  • 2)With external third harmonic generator model STQH-130;

  • 3)With external fourth harmonic generator model STQH-140;

  • 4)You can choose any PRR from 1Hz to 20Hz when placing an order. All parameters are specified for 20 Hz;

  • 5)Specified at 1064 nm;

  • 6)With respect to external trigger pulse.

The system consists of two modules – the DPSS pulsed laser model STQX-500 (at 1064nm) and removable module for any harmonic generator model STQH (at 532nm, 355nm, 266nm). So, the customer can work either with 1064nm or with any harmonic in depend on applications. The removable harmonic generator module can be fix at STQX-500 output or remove by manual.

Our DPSS lasers do not require visit of engineer for installation procedure due to special technical design that exclude the possible misalignment of the laser’s optical scheme. The end user can start to work STQX-500 laser by himself without any troubles. All necessary information for working is presented in the user manual and video guide instruction. Even the specialist without technical skills can start and work with QX500 laser comfortable.

  • Submit Inquiry
  • Send us a message

    CLOSE